|
|
Binary Output with Line Fault Transparency for Imax = 60 mA Type 9175/10-12-12 LFT
- Intrinsically safe output [Ex ia] IIC
- 1 channel
- Galvanic isolation between input and output
- Open-circuit and short-circuit monitoring (can be switched off)
- Line fault transparent (LFT): line fault signalling directly via output on PLC / DCS
- Installation possible in Zone 2
- For use up to SIL 2 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output with Line Fault Transparency for Imax = 45 mA Type 9175/10-14-12 LFT
- Intrinsically safe output [Ex ia] IIC
- 1 channel
- Galvanic isolation between input and output
- Open-circuit and short-circuit monitoring (can be switched off)
- Line fault transparent (LFT): line fault signalling directly via output on PLC / DCS
- Installation possible in Zone 2
- For use up to SIL 2 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output with Line Fault Transparency for Imax = 35 mA Type 9175/10-16-12 LFT
- Intrinsically safe output [Ex ia] IIC
- 1 channel
- Galvanic isolation between input and output
- Open-circuit and short-circuit monitoring (can be switched off)
- Line fault transparent (LFT): line fault signalling directly via output on PLC / DCS
- Installation possible in Zone 2
- For use up to SIL 2 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output for Imax = 60 mA Type 9175/.0-12-11
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between input, output and power supply
- Open-circuit and short-circuit monitoring (can be switched off)
- Installation possible in Zone 2 and Div. 2
- For use up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output for Imax = 45 mA Type 9175/.0-14-11
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between input, output and power supply
- Open-circuit and short-circuit monitoring (can be switched off)
- Installation possible in Zone 2 and Div. 2
- For use up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output for Imax = 35 mA Type 9175/.0-16-11
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between input, output and power supply
- Open-circuit and short-circuit monitoring (can be switched off)
- Installation possible in Zone 2 and Div. 2
- For use up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output Loop Powered for Imax = 60 mA Type 9176/.0-12-00.
- For intrinsically safe operation of Ex i solenoid valves, indicators and horns
- Power supply by control circuit, loop powered
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between inputs and outputs
- Installation possible in Zone 2 and Div. 2
- Can be used up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output Loop Powered for Imax = 45 mA Type 9176/.0-14-00.
- For intrinsically safe operation of Ex i solenoid valves, indicators and horns
- Power supply by control circuit, loop powered
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between inputs and outputs
- Installation possible in Zone 2 and Div. 2
- Can be used up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output Loop Powered for Imax = 29 mA Type 9176/.0-15-00.
- For intrinsically safe operation of Ex i solenoid valves, indicators and horns
- Power supply by control circuit, loop powered
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between inputs and outputs
- Installation possible in Zone 2 and Div. 2
- Can be used up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output Loop Powered for Imax = 35 mA Type 9176/.0-16-00.
- For intrinsically safe operation of Ex i solenoid valves, indicators and horns
- Power supply by control circuit, loop powered
- Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC
- 1 and 2 channels
- Galvanic isolation between inputs and outputs
- Installation possible in Zone 2 and Div. 2
- Can be used up to SIL 3 (IEC 61508)
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
|
|
Binary Output Loop Powered for Imax = 43 mA Type 9176/.0-17-00.
- For intrinsically safe operation of Ex i solenoid valves, indicators and horns
- Power supply by control circuit, loop powered
- Intrinsically safe output [Ex ia] IIC
- 1 and 2 channels
- Galvanic isolation between inputs and outputs
- Installation possible in Zone 2 and Div. 2
- For use up to SIL 3 (IEC 61508)
|
Zones |
|
0 |
1 |
2 |
20 |
21 |
22 |
Ex i interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
